VLAN id is sometimes displayed wrong under devices

[ebuckland81]

I see something like this too now.

Created another topic here:

VLAN ID, Ch/Port and Link off for devices connected to Switch S8

Oddities have emerged lately…either due to my rearrangement of VLANs or due to some of the latest firmwares. Some devices connected to an S8 Switch show up as connected to Route10 with a bad VLAN ID (but Port/Ch corresponds to that S8 port on Route10, e.g. W1). I have seen this earlier and it was fixed, but has now re-emerged. Some other devices have “healed” and finally showing up at the correct network device and with the correct VLAN ID, but still no Ch/Port shown. The first off VLAN ID is…