VLAN id is sometimes displayed wrong under devices

[Bill_Ny]

Bug still an issue:

Devices page.
Most of the devices show they are in a VLAN that does not exist.
Some devices on Vlan 1 show vlan 11
few devices show Vlan 7… I dont have a vlan 7, but theses should show Vlan 12.

b-

[richardvaughan]

@Alta-MikeD,

I can confirm I have the same issue. I had thought this was sorted on a previous FW release.

Thanks

[ebuckland81]

I see something like this too now.

Created another topic here:

VLAN ID, Ch/Port and Link off for devices connected to Switch S8

Oddities have emerged lately…either due to my rearrangement of VLANs or due to some of the latest firmwares. Some devices connected to an S8 Switch show up as connected to Route10 with a bad VLAN ID (but Port/Ch corresponds to that S8 port on Route10, e.g. W1). I have seen this earlier and it was fixed, but has now re-emerged. Some other devices have “healed” and finally showing up at the correct network device and with the correct VLAN ID, but still no Ch/Port shown. The first off VLAN ID is…

[Alta-Jeff]

@Bill_Ny @richardvaughan We have a firmware that should resolve this issue for you. Please reach out to me if you’d like to try it before we release it.

[jmszuch]

Hi Jeff! I believe I’m seeing this behavior at some sites as well and I’d be happy to test out the new firmware at a couple of them

[Alta-Jeff]

@jmszuch Sure just invite me to any site you want to test it on.

[jmszuch]

Thanks! I’ll shoot you a DM shortly with a site to follow up.