I am unsure if you meant the Alta Labs App on your mobile or simply the mobile version of the web dashboard.
Because of these issues I consider the Android mobile App to be very much in alpha/beta phase and just switched to using the web dashboard to make changes from my mobile. It’s a lot friendlier (and frustration free) to simply navigate on mobile.
If you meant the application, yes, I too have also noticed bugs in the Mobile App like this.
Wireless settings displayed and options displayed don’t coincide to the web dashboard or what’s supported (and also some don’t actually apply if you change them from the mobile app).
Lack of functionality and settings for some of the basic reasons to access the dashboard.
Absolutely, and my apologies for the delay in responding.
This is on the Android APP version 1.18.2
Device: Samsung SM-F936U1 Android 14 kernel 5.10.209 build up1a.231005.007
The spelling error is minor, but noticeable when you are initially setting up your SSID information. When configuring your SSID, the description reads “fro” instead of “for”. I know its picky, but you know what they say about first impressions.
Also, when I started with Alta Labs gear, I only had the Route10, so it was odd to be asked SSID info if I had no AP’s. I figured it was because EVERYONE should get the pair, but I could not, I just wanted to get an amazing router/firewall to start with.
Still an oddity to find during the setup process.
I will reply separately with the other inconsistencies, so they can be replied to individually if needed.
settings that don’t stick / don’t apply from mobile app:
This is on the Android APP version 1.18.2
Device: Samsung SM-F936U1 Android 14 kernel 5.10.209 build up1a.231005.007
Setting a single color group (other than black) to an SSID does not always apply on mobile as a single step process.
Example: Say you want a new SSID broadcast from only 1 AP.
setup a new SSID, make it the color group blue or red, remove black (all). save.
go to network, then tap on ap6, it automatically has the new SSID/color even though you didn’t apply it.
The SSID creation process on mobile sometimes automatically adds the black (all), even though you removed it, which causes the AP’s to start broadcasting that SSID, forcing you to reenter the settings and remove it afterwards as a secondary process.
When you create a new SSID from the web dashboard, it respects the settings and doesn’t add black(all) to every new SSID created. However, I have noticed that removing the black(all) group is at times not instant from the app, it takes a few taps to remove it. This could be a refresh/sync issue maybe?
Air-Time Efficiency settings don’t get applied to devices when set to manual through the mobile app, the devices keep operating at the previous settings.
Min Connection Strength settings missing in mobile app… why, if they are directly related to the above?