Improve WPA3 transition mode compatibility with older devices
Add NAS-IP-Address to all RADIUS frames
AP6W: Resolve reporting of incorrect mesh status
Improve mesh loop detection
Resolve issues with incorrect 802.1x identity reporting
AP7-Pro: Improve system stability
This update is being rolled out now. You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:
As always, if you have questions or encounter any issues, feel free to reply here or start a new topic. Please include details about the issue so we can assist you effectively.
Tried WPA3 transition mode and while my wife`s motorola G6 can now connect speeds was really slow (with quite high CPU utilisation) so i disabled WPA3 again.
With WPA3 and PMF set to on my Samsung s24 got 10-20 Mbit (with 1-200 on one occasion) instead of starting at 800 and maxing at ~950 Mbit/s.
And my new (1x1) laptop maxed out at around 70~Mbit (RTL8831be) with 601 Mbit link rate. During the download CPU usage of the AP was unusually high.
Everything works fine with WPA3 set to off, but might send a mail to support if I get around to try it at bit more.
