I wanted to post my temperature readings and get some input on what “acceptable” readings should be. Both of these APS are mounted on the ceiling, with no obstructions around them that should be trapping hot air. These readings were both taken this morning with a house temperature of 25C.
root@Kitchen:~# cat /sys/class/thermal/thermal_zone*/temp
73000
76000
73000
78000
root@MBR:~# cat /sys/class/thermal/thermal_zone*/temp
67000
71000
67000
73000
Hallo rutman286. My highest measured value was 84000, but only for a few seconds. The sun was shining on the AP.
On the Internet you can find only Qualcomm IPQ5018 operating within a temperature range of -20 - 70 °C. However, this only describes the environment.
I’ve wrapped mine in a blanket and ran iPerf transmitting for days, and couldn’t get it above the listed specs.
But obviously we’ve lab-tested it as well. So far no RMAs… I do admit it gets hot to the touch, but it’s still within specs of all of the components 