I just got an S8 POE today as I had seen some weirdness with my Aruba Switch when powering my AP6-Pros ( I had one AP that wouldn’t power on and I thought was dead until I moved it to an old TP-Link POE switch). Anyway I noticed that the switch constantly has almost 100% CPU usage with 3 APS and a …

Hmm, to my knowledge that’s not normal or expected. You will see it spike during firmware upgrades, or while provisioning but it should not be consistently at ~100%. I understand the 3x AP6-Pro and TP-Link switch connect to the S8. Does the S8 connect to the router? Or just the TP-Link switch? Or b…

I have rebooted a few times but it still seems to hang around the 100% mark with occasional dips to 60/ 70% but most times the little icon for the CPU is either Red or Orange. The S8 is connected to the router and the TP-Link is connected to the S8 - the reason for this is the router only has one l…

[image] Alta-MikeD: Are you familiar with SSH? If so, have you provisioned an SSH key? If not, there is another way too. I’d like to review a screenshot of top to view the process(es) consuming the device’s resources. I don’t know how to provision a SSH key sadly - used SSH before but never p…

[image] user19: I had seen some weirdness with my Aruba Switch when powering my AP6-Pros ( I had one AP that wouldn’t power on and I thought was dead until I moved it to an old TP-Link POE switch). Before I forget about this. Is this the only weirdness you noticed? Or was there anything else?…

[image] Alta-MikeD: Before I forget about this. Is this the only weirdness you noticed? Or was there anything else? Can you please share the model of Aruba switch? The switch is an Aruba instant on 1830 POE 24 port - JL813A The power issue is the only issue I had with the Alta APs, the other…

I had a brainwave and created some SSH keys using 1password - using RSA but i still get permission denied (Public Key).

Oops, sorry, I wrote a reply yesterday, but I never actually clicked reply. [image] user19: The switch is an Aruba instant on 1830 POE 24 port - JL813A Thanks for sharing. [image] user19: I have swapped out the TP-Link devices and put back the 24 Port Aruba POE switch and I am still see…

[image] Alta-MikeD: I actually just switched to using 1password for SSH keys on my Mac a few weeks ago. Did you perform the steps HERE ? Is it prompting you to unlock/use the key when trying to connect? Or can you tell if it’s trying the saved key via 1password? I got it working - finally in, …

Hmm, it should show similar. Yeah, htop is not bundled. Generally when I’m checking if I’m adding usr, sys, and nic CPU I get the reported matches system load in the UI. Is it still spiking between red or orange? Was management open when you checked top in this screenshot? Can you check with manage…

I’ll fire my switch back up and watch it for a few days for the same thing.

Alta Labs

S8 POE - High CPU usage

Switches

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled