S8 not getting configuration

Switches
1

I have an S8 managed by the cloud controller that is not getting configuration updates when changing interface configs. For example, disabling a port does not disable the port, and I don’t see anything in /var/log/messages like I normally would when configuration is received and programmed.

If I make an update to a global setting like SNMP or Syslog, then the configuration gets pushed in addition to my “pending” interface configuration.

I tried on different browsers with the same result.

2

Is there any difference if you reboot the switch? i.e. disable a port, reboot the switch through the web UI, check post reboot if the port is then disabled?

3

@jeffk931 Sorry for the inconvenience. This was due to a new issue introduced last night, but has just been fixed. Please let me know if you have any other issues whatsoever.

4

Working great now, thanks!

1 Like