When i setup my network i used the same SSID and password pretty much every device reconnected by itself as usual. However i have a few brands of smart plugs that show they are connected but for some reason aren’t getting an IP address? Any idea why that would be?

It definitely could. I would strongly recommend Standard to start with. There is filtering in place for the other networks that can cause communication problems depending on the protocol There’s a great writeup about it here: Different Network Types :

Alta Labs

IoT Devices On The "Large" Network Type

Access Points

rutman286 September 7, 2023, 12:39am 6

Any chance you might be running into this weirdness I ran into?