Trying to apply a DHCP reservation for a specific device, I have done an import and most of the devices worked but some were missed, they are connecting and getting normal DHCP addresses but if I try and apply a static address at the client level, or if I try and do an import with a single line both show successful but no matter what that device just grabs its previous DHCP leased address.
My first thought on this is that the device is hanging on to the original DHCP lease and won’t grab the new reserved address until the lease expires. But if you’ve already tried to release the lease on the client device then please ignore that thought!
1 Like
Yea its a smart switch, but I have completely reboot the device, reboot all aps, and forced a reconnect on the device. I see it drop and then come back with that same dhcp IP not the correct one.
This thread has been automatically closed due to inactivity. If you believe you have the same issue, please create a new post describing your issue. Feel free to link to this post for context if desired.