So ive noticed that when i set the 2.4ghz and 5ghz channels to “AUTO” certain channels seems to not broadcast my SSID or allow me to connect to the channel/spectrum. I have to change the “AUTO” to Manual and set a chanel to 6/11 and 36/149 and it functions but some channels in auto seem to take the channel out.
@WirepowerWhat channels do you see that have this effect while on “Auto” or is it any channel that gets assigned using “Auto”?
Certain channels that get assigned on auto.
@Wirepower84 Are there specific channels? I only ask because I’m going to try and replicate it so I just want to be sure I’m seeing what you’re seeing.
Ah ok.
Will need to try it when I’m back home.
Issue is as there are 2 ap. It may connect to the other if it can’t connect the 1 ap channel