Using Route 10 to 10G microtik switch to AP7
On my devices: pixel 6a, Windows computers i’m getting great speed, good signal and stability. However, a few Apple devices such as a 2012 iPhone and 2019 iPad have been flakely in certain areas of the apartment when they were fine before. I think i might need to change some settings. Anyone have an idea what could be causing this on these devices?
WPA3 is on. PFM is on but not required. I have fast roaming on. The broadcast strength is set to high on all bands
Could you try creating another SSID with the default settings (no WPA3/PMF) and forget the current network on both the iPhone and iPad? I would also try disabling Fast Roaming on the test SSID(2012 is fairly old and may not support fast roaming, while the 2019 iPad should)
If you are still not having any luck, I would encourage you to reach out to support so that we can take a better look.
I reverted back to default settings and created a new SSID for the Mac devices. Will see if this solves it. Thanks for the quick reply
Thanks for the update. Please let us know how things are going once you’ve had a chance to try the new SSID.