# VLAN networks incorrectly assigned to WAN zone

**URL:** <https://forum.alta.inc/t/vlan-networks-incorrectly-assigned-to-wan-zone/7221>\
**Category:** Routers\
**Tags:** bug-report, route10\
**Created:** [November 16, 2026, 9:26pm UTC](https://forum.alta.inc/t/vlan-networks-incorrectly-assigned-to-wan-zone/7221 "2026-11-16T21:26:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![chaz6](https://forum.alta.inc/user_avatar/forum.alta.inc/chaz6/32/3821_2.png) [@chaz6](https://forum.alta.inc/u/chaz6)\
**Post date:** [November 16, 2026, 9:26pm UTC](https://forum.alta.inc/t/vlan-networks-incorrectly-assigned-to-wan-zone/7221/1 "2026-11-16T21:26:28Z")

</div>

I have some port forwards configured that have a `Zone In` setting of `WAN`. However, I am observing that packets from internal networks configured on a VLAN are also being natted (i.e. LAN to LAN). If I set the `Zone In` setting to `LAN` then the packets are no longer natted (which is the correct behavior for the LAN, but this breaks the incoming WAN port forwarding)..

---

<div class="post-metadata">

**Author:** ![chaz6](https://forum.alta.inc/user_avatar/forum.alta.inc/chaz6/32/3821_2.png) [@chaz6](https://forum.alta.inc/u/chaz6)\
**Post date:** [November 17, 2026, 9:30pm UTC](https://forum.alta.inc/t/vlan-networks-incorrectly-assigned-to-wan-zone/7221/2 "2026-11-17T21:30:36Z")

</div>

I have also tried explicitly setting the destination ip in the port forward rule (to the wan address) but this also has no effect; the LAN to LAN traffic is still being NAT’ed which is unwanted behaviour.
