# Table-top/Stand mount for AP6/AP6Pro

**URL:** <https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640>\
**Category:** Access Points\
**Tags:** ap6-pro\
**Created:** [July 16, 2025, 2:39pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640 "2025-07-16T14:39:59Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![carrottspc](https://forum.alta.inc/user_avatar/forum.alta.inc/carrottspc/32/962_2.png) [@carrottspc](https://forum.alta.inc/u/carrottspc)\
**Post date:** [July 16, 2025, 2:39pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/1 "2025-07-16T14:39:59Z")

</div>

Anyone have a good option for a stand/desktop/table-top for the AP6/AP6Pro access points? Not just laying it on its back, but an actual stand option? Just curious if anyone has done this.

---

<div class="post-metadata">

**Author:** ![DN3092](https://forum.alta.inc/user_avatar/forum.alta.inc/dn3092/32/3178_2.png) [@DN3092](https://forum.alta.inc/u/DN3092)\
**Post date:** [July 16, 2025, 4:05pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/2 "2025-07-16T16:05:33Z")

</div>

I use a monitor mount and just mounted the bracket to it. Worked out well I think.

[Home network upgrade - Stories - Alta Labs](https://forum.alta.inc/t/home-network-upgrade/4422/11)

---

<div class="post-metadata">

**Author:** ![rafal.jachym](https://forum.alta.inc/letter_avatar_proxy/v4/letter/r/8e7dd6/32.png) [@rafal.jachym](https://forum.alta.inc/u/rafal.jachym)\
**Post date:** [July 16, 2025, 4:55pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/3 "2025-07-16T16:55:33Z")

</div>

Hi,

I’m in the process of designing it for 3D printing, I think it will be ready by Sunday.

---

<div class="post-metadata">

**Author:** ![rafal.jachym](https://forum.alta.inc/letter_avatar_proxy/v4/letter/r/8e7dd6/32.png) [@rafal.jachym](https://forum.alta.inc/u/rafal.jachym)\
**Post date:** [July 17, 2025, 3:22pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/4 "2025-07-17T15:22:43Z")

</div>

hi,

The project is available here:

> **[Stand for ALTA LABS AP6 | AP6 PRO](https://cults3d.com/en/3d-model/gadget/stan-alta-labs-ap6-ap6-pro)**
>
> ALTA LABS AP6 and AP6 PRO Access Point Stand
> You'll need an 
> 1x M3x30mm screw, 
> 1x M3 nut, and 
> 2-5 2.5x8mm screws or similar.
> I used wood screws.

---

<div class="post-metadata">

**Author:** ![DN3092](https://forum.alta.inc/user_avatar/forum.alta.inc/dn3092/32/3178_2.png) [@DN3092](https://forum.alta.inc/u/DN3092)\
**Post date:** [July 17, 2025, 3:23pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/5 "2025-07-17T15:23:16Z")

</div>

Good job man, looks slick. Would it be possible to make a groove down one of the supports to route the cable into?

---

<div class="post-metadata">

**Author:** ![rafal.jachym](https://forum.alta.inc/letter_avatar_proxy/v4/letter/r/8e7dd6/32.png) [@rafal.jachym](https://forum.alta.inc/u/rafal.jachym)\
**Post date:** [July 17, 2025, 4:32pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/6 "2025-07-17T16:32:51Z")

</div>

you ask, you get.

I added the 3rd file with the cable groove

---

<div class="post-metadata">

**Author:** ![system](https://forum.alta.inc/uploads/default/original/1X/087669c3d7c0a6495087b41d6f385a6771f2231c.png) [@system](https://forum.alta.inc/u/system)\
**Post date:** [January 13, 2026, 4:33pm UTC](https://forum.alta.inc/t/table-top-stand-mount-for-ap6-ap6pro/5640/7 "2026-01-13T16:33:32Z")

</div>

This thread has been automatically closed due to inactivity. If you believe you have the same issue, please create a new post describing your issue. Feel free to link to this post for context if desired.