# Route10 needs link reset after 1.3v update

**URL:** <https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442>\
**Category:** Routers\
**Tags:** router\
**Created:** [January 23, 2025, 1:42pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442 "2025-01-23T13:42:41Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![tato](https://forum.alta.inc/letter_avatar_proxy/v4/letter/t/9de053/32.png) [@tato](https://forum.alta.inc/u/tato)\
**Post date:** [January 23, 2025, 1:42pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/1 "2025-01-23T13:42:41Z")

</div>

post reboot, SFP on LAN port did not come online, i had to remove the SFP and reinsert it back! then it worked OK. Other than that no issues so far!

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [January 23, 2025, 7:12pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/2 "2025-01-23T19:12:33Z")

</div>

> [@tato](#):
>
> post reboot, SFP on LAN port did not come online, i had to remove the SFP and reinsert it back! then it worked OK. Other than that no issues so far!

Can you share:

- The make/model of the SFP plugged into the Route10
- The make/model of the SFP on the other end of that link (if different)
- The make/model of the device on the other end of that link

---

<div class="post-metadata">

**Author:** ![tato](https://forum.alta.inc/letter_avatar_proxy/v4/letter/t/9de053/32.png) [@tato](https://forum.alta.inc/u/tato)\
**Post date:** [January 23, 2025, 8:07pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/3 "2025-01-23T20:07:10Z")

</div>

Here you go! They are Juniper branded SFP 1Gbps

**SFP Make:** Methode Elec.  
**OUI:** 000000  
**Model:** SP7041-M1-JNRev: -  
**Serial:** B163168  
**Date:** 11041901

like this one

> **[JUNIPER Networks 740-013111 SP7041-M1-JN REV 02 Transceiver | eBay](https://www.ebay.com/itm/294819668721)**
>
> RedByte Technology.

On the other side i have another device (TPLINK AX11000) connected via RJ45

Thank you!

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [January 23, 2025, 9:19pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/4 "2025-01-23T21:19:19Z")

</div>

> [@tato](#):
>
> Here you go! They are Juniper branded SFP 1Gbps
> 
> **SFP Make:** Methode Elec.  
> **OUI:** 000000  
> **Model:** SP7041-M1-JNRev: -  
> **Serial:** B163168  
> **Date:** 11041901
> 
> like this one  
> [JUNIPER Networks 740-013111 SP7041-M1-JN REV 02 Transceiver | eBay](https://www.ebay.com/itm/294819668721)
> 
> On the other side i have another device (TPLINK AX11000) connected via RJ45
> 
> Thank you!

I’m double checking, but I don’t think that’s an officially supported SFP. It’s coded for Juniper so typically, it would only be expected to work in a normal function within a Juniper device. I’ll respond here when I get some more information.

I have to ask, why burn a SFP+ interface on a 1gbps copper SFP? Are all the other copper interfaces on the Route10 already taken?

---

<div class="post-metadata">

**Author:** ![tato](https://forum.alta.inc/letter_avatar_proxy/v4/letter/t/9de053/32.png) [@tato](https://forum.alta.inc/u/tato)\
**Post date:** [January 23, 2025, 9:27pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/5 "2025-01-23T21:27:59Z")

</div>

Yeah all the other ports are occupied! and i did not want to add another switch just for one port! SFP has been running fine last two weeks or so!

It is just with the last update i noticed the port did not came back online so i had unplug and plug it back then it worked again!

Appreciate it if you could check the support level or recommend another supported one!

thank you!

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [January 23, 2025, 9:35pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/6 "2025-01-23T21:35:14Z")

</div>

> [@tato](#):
>
> Yeah all the other ports are occupied! and i did not want to add another switch just for one port! SFP has been running fine last two weeks or so!
> 
> It is just with the last update i noticed the port did not came back online so i had unplug and plug it back then it worked again!
> 
> Appreciate it if you could check the support level or recommend another supported one!
> 
> thank you!

Ok, fair enough.

We’re not seeing any particular compatibility concerns. Looks like we’re going to purchase one to test.

In the meantime, you could try forcing the speed of that interface if you haven’t already.

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [January 23, 2025, 9:39pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/7 "2025-01-23T21:39:19Z")

</div>

As you may have noticed, I moved this report to its own thread so it’s easier to follow/troubleshoot

---

<div class="post-metadata">

**Author:** ![tato](https://forum.alta.inc/letter_avatar_proxy/v4/letter/t/9de053/32.png) [@tato](https://forum.alta.inc/u/tato)\
**Post date:** [January 24, 2025, 1:43pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/8 "2025-01-24T13:43:02Z")

</div>

OK will do a few more test over the weekend and let you know!

I will perform a reboot twice and observe it then set speed limit! SFP is 1Gbps but Tplink device interface is 2.5Gbps perhaps speed negotiation etc may play a factor here! I will let you know!

thank you!

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [January 24, 2025, 4:51pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/9 "2025-01-24T16:51:59Z")

</div>

Yes, agreed, if possible set the link speed on the TP-Link as well.

---

<div class="post-metadata">

**Author:** ![tato](https://forum.alta.inc/letter_avatar_proxy/v4/letter/t/9de053/32.png) [@tato](https://forum.alta.inc/u/tato)\
**Post date:** [January 27, 2025, 6:39pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/10 "2025-01-27T18:39:51Z")

</div>

OK Here is my test:

1- I rebooted Route 10, it came back SFP was visible on the port but link was down!  
2- Set the speed limit to 1Gbps and the link came back online  
3- Rebooted the Route 10 again and it came back online as expected (link speed still set to 1Gbps)

Let me know if you need anything else!

---

<div class="post-metadata">

**Author:** ![system](https://forum.alta.inc/uploads/default/original/1X/087669c3d7c0a6495087b41d6f385a6771f2231c.png) [@system](https://forum.alta.inc/u/system)\
**Post date:** [January 12, 2026, 4:21pm UTC](https://forum.alta.inc/t/route10-needs-link-reset-after-1-3v-update/4442/11 "2026-01-12T16:21:16Z")

</div>

Closed on January 12, 2026, 4:21pm UTC

This thread has been automatically closed due to inactivity. If you believe you have the same issue, please create a new post describing your issue. Feel free to link to this post for context if desired.
