# How to use wg client (w/ static routing) in route10?

**URL:** <https://forum.alta.inc/t/how-to-use-wg-client-w-static-routing-in-route10/4683>\
**Category:** Routers\
**Tags:** controller\
**Created:** [February 22, 2025, 3:19pm UTC](https://forum.alta.inc/t/how-to-use-wg-client-w-static-routing-in-route10/4683 "2025-02-22T15:19:19Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![erpn7](https://forum.alta.inc/letter_avatar_proxy/v4/letter/e/f475e1/32.png) [@erpn7](https://forum.alta.inc/u/erpn7)\
**Post date:** [February 24, 2025, 10:51pm UTC](https://forum.alta.inc/t/how-to-use-wg-client-w-static-routing-in-route10/4683/5 "2025-02-24T22:51:55Z")

</div>

update to 1.3y … reboot … still not routing the subnet 10.x.x.1/24 out thru the wg\_client  
(i even tried 10.x.x.1/32 [route just 1 ip] still not luck [with reboot of route10 after every client change])  
also, im still not able to add wg client without PKS.  
_firmware 1.3x → Add support for WireGuard client without PSK (controller support pending)_

```auto
current firmware:
route10 -- 1.3y
s8-poe -- 2.1t
APs -- 2.2g
controller -- cloud

```

---

_[View the full topic](https://forum.alta.inc/t/how-to-use-wg-client-w-static-routing-in-route10/4683)._