# Dante VLAN - Color Profile

**URL:** <https://forum.alta.inc/t/dante-vlan-color-profile/7050>\
**Category:** Switches\
**Created:** [October 2, 2026, 12:45am UTC](https://forum.alta.inc/t/dante-vlan-color-profile/7050 "2026-10-02T00:45:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![douglasvb](https://forum.alta.inc/letter_avatar_proxy/v4/letter/d/779978/32.png) [@douglasvb](https://forum.alta.inc/u/douglasvb)\
**Post date:** [October 2, 2026, 12:45am UTC](https://forum.alta.inc/t/dante-vlan-color-profile/7050/1 "2026-10-02T00:45:37Z")

</div>

Hi VLAN/Dante newb here; I created a new VLAN (2) for Dante devices. and setup some QOS in a new (Red) profile. The (Black) profile includes VLAN 2 on all ports, across (2) 48 port switches. Is there a way to exclude VLAN 2 on the default profile, so I don’t have to disable it on all these ports individually?

---

<div class="post-metadata">

**Author:** ![Alta-James](https://forum.alta.inc/letter_avatar_proxy/v4/letter/a/3be4f8/32.png) [@Alta-James](https://forum.alta.inc/u/Alta-James)\
**Post date:** [October 2, 2026, 2:02pm UTC](https://forum.alta.inc/t/dante-vlan-color-profile/7050/2 "2026-10-02T14:02:38Z")

</div>

The black color group can’t be editted, so the best option would be to create a second color group with VLAN2 excluded and mass apply it each switch.

 ![image](https://forum.alta.inc/uploads/default/original/2X/d/db616382893346f1dfc914311b5735fc302e981c.png)