# Control 1.1y Released! (cloud & on-premises)

**URL:** <https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774>\
**Category:** Alta Control\
**Tags:** controller\
**Created:** [June 11, 2026, 11:19pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774 "2026-06-11T23:19:30Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [June 11, 2026, 11:19pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774/1 "2026-06-11T23:19:30Z")

</div>

This update to Alta Control expands visibility and policy management capabilities across the platform, with enhancements to network monitoring, access control, firewall management, and device discovery, alongside a variety of usability and workflow improvements.

- WiFi: Add support for schedule profiles.
- WiFi: Add support for scheduled filters.
- Devices: Add device temperature metric to graphs.
- Switches: Show total POE budget in Device Card.
- Firewall: Various improvements, including simple port-forward rule creation mode.
- Allow `0.0.0.0/1` remote VPN routes to support full-tunnel VPN configurations using paired /1 routes. To route all traffic through the VPN, configure `0.0.0.0/1,128.0.0.0/1`.
- Audit Log: Improve several log messages.
- Improve Alta device discovery.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight. Here is the full running changelog:

> [@Control - Release Notes](https://forum.alta.inc/t/control-release-notes/2980#p-9767-h-11y-1):
>
> Thanks for all of your feedback helping improve the Alta products! Having trouble upgrading? In rare cases (older images or offline controllers), additional steps may be required. See [THIS](https://help.alta.inc/hc/en-us/articles/45447905137051-Alta-Control-Upgrade-Issues-Devices-Running-Older-Images-or-Offline-Systems) article for details. 1.1y Released on 06/11/2026 WiFi: Add support for schedule profiles. WiFi: Add support for scheduled filters. Devices: Add device temperature metric to graphs. Switches: Show total POE budget in Device Card. Firewall: Various improvements, including simple port-forward rule creation mo…

If you have any questions let us know, and as usual if you notice anything please feel free to reply here, or create a new topic, including the details of the issue encountered. Thanks!

---

<div class="post-metadata">

**Author:** ![akalkbrenner](https://forum.alta.inc/letter_avatar_proxy/v4/letter/a/cab0a1/32.png) [@akalkbrenner](https://forum.alta.inc/u/akalkbrenner)\
**Post date:** [June 12, 2026, 1:58pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774/2 "2026-06-12T13:58:18Z")

</div>

> [@Alta-MikeD](#):
>
> - Allow 0.0.0.0/1 for remote VPN route (for routing all traffic over a VPN).

Just to confirm - with 0.0.0.0/1, that will not route all traffic over the vpn, we would need to also have 128.0.0.0/1 as well. Correct?

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [June 12, 2026, 4:00pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774/3 "2026-06-12T16:00:40Z")

</div>

> [@akalkbrenner](#):
>
> Just to confirm - with 0.0.0.0/1, that will not route all traffic over the vpn, we would need to also have 128.0.0.0/1 as well. Correct?

Correct. We previously disallowed both `0.0.0.0/0` AND `0.0.0.0/1` in the remote subnet validation. `128.0.0.0/1` has always been allowed. We still do not allow `0.0.0.0/0` but we added `0.0.0.0/1`.

IF you require true full routing, you would need to enter both, comma-separate, like so: `0.0.0.0/1,128.0.0.0/1`

EDIT: Updated the changelog entry, hopefully that should help clarify the behavior. Thanks for raising this!

---

<div class="post-metadata">

**Author:** ![allie](https://forum.alta.inc/letter_avatar_proxy/v4/letter/a/eada6e/32.png) [@allie](https://forum.alta.inc/u/allie)\
**Post date:** [June 16, 2026, 1:06pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774/4 "2026-06-16T13:06:54Z")

</div>

I assume that supporting `0/0` routes for full tunnels will eventually land (maybe about the same time as policy routes over VPN interfaces), and we’ll get some nice UI features to policy route the tunnel _itself_ via the WAN(s)?

(This is a welcome improvment, nonetheless!)

---

<div class="post-metadata">

**Author:** ![Alta-Jeff](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-jeff/32/56_2.png) [@Alta-Jeff](https://forum.alta.inc/u/Alta-Jeff)\
**Post date:** [June 16, 2026, 2:44pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774/5 "2026-06-16T14:44:10Z")

</div>

PBR to VPN endpoints is under internal testing, so definitely coming fast. As far as routing everything over a VPN with 0/1,128/1, that can already be done.

---

<div class="post-metadata">

**Author:** ![dalewhlrr](https://forum.alta.inc/user_avatar/forum.alta.inc/dalewhlrr/32/1780_2.png) [@dalewhlrr](https://forum.alta.inc/u/dalewhlrr)\
**Post date:** [June 16, 2026, 2:49pm UTC](https://forum.alta.inc/t/control-1-1y-released-cloud-on-premises/6774/6 "2026-06-16T14:49:59Z")

</div>

![Yeesssss GIFs - Find & Share on GIPHY](https://forum.alta.inc/uploads/default/original/2X/e/ec26fa2a605703583b83ffac97c560305cd5c4d9.gif)
