# AP7-Pro 3.0i and AP6 2.4j Firmware Released

**URL:** <https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915>\
**Category:** Access Points\
**Created:** [August 7, 2026, 12:20am UTC](https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915 "2026-08-07T00:20:34Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alta-Jeff](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-jeff/32/56_2.png) [@Alta-Jeff](https://forum.alta.inc/u/Alta-Jeff)\
**Post date:** [August 7, 2026, 12:20am UTC](https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915/1 "2026-08-07T00:20:34Z")

</div>

- Improve WPA3 transition mode compatibility with older devices
- Add NAS-IP-Address to all RADIUS frames
- AP6W: Resolve reporting of incorrect mesh status
- Improve mesh loop detection
- Resolve issues with incorrect 802.1x identity reporting
- AP7-Pro: Improve system stability

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-30i-ap7-pro-and-24j-all-ap6-1):
>
> Thanks for all of your feedback helping improve the Alta products! 3.0i (AP7-Pro) and 2.4j (All AP6) Released on 08/06/2026 Improve WPA3 transition mode compatibility with older devices Add NAS-IP-Address to all RADIUS frames AP6W: Resolve reporting of incorrect mesh status Improve mesh loop detection Resolve issues with incorrect 802.1x identity reporting AP7-Pro: Improve system stability 3.0h (AP7-Pro) and 2.4i (All AP6) Released on 07/16/2026 Add support for per-client profiles Add supp…

As always, if you have questions or encounter any issues, feel free to reply here or start a new topic. Please include details about the issue so we can assist you effectively.

---

<div class="post-metadata">

**Author:** ![CheyenneLabs](https://forum.alta.inc/user_avatar/forum.alta.inc/cheyennelabs/32/5138_2.png) [@CheyenneLabs](https://forum.alta.inc/u/CheyenneLabs)\
**Post date:** [August 7, 2026, 1:53am UTC](https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915/2 "2026-08-07T01:53:40Z")

</div>

I very much appreciate the mesh loop protection and ap7 stability

---

<div class="post-metadata">

**Author:** ![danne.esset](https://forum.alta.inc/user_avatar/forum.alta.inc/danne.esset/32/3406_2.png) [@danne.esset](https://forum.alta.inc/u/danne.esset)\
**Post date:** [August 12, 2026, 9:42am UTC](https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915/3 "2026-08-12T09:42:54Z")

</div>

Tried WPA3 transition mode and while my wife`s motorola G6 can now connect speeds was really slow (with quite high CPU utilisation) so i disabled WPA3 again.

With WPA3 and PMF set to on my Samsung s24 got 10-20 Mbit (with 1-200 on one occasion) instead of starting at 800 and maxing at ~950 Mbit/s.  
And my new (1x1) laptop maxed out at around 70~Mbit (RTL8831be) with 601 Mbit link rate. During the download CPU usage of the AP was unusually high.

Everything works fine with WPA3 set to off, but might send a mail to support if I get around to try it at bit more.

 ![image](https://forum.alta.inc/uploads/default/original/2X/f/f40d485b39f430c0f71a41fe4fe72abce2174fd9.png)

Just make sure to speed test your connection if you enable WPA3 after upgrade.