# AP - Release Notes

**URL:** <https://forum.alta.inc/t/ap-release-notes/318>\
**Category:** Release Notes\
**Tags:** firmware\
**Created:** [June 15, 2023, 9:21am UTC](https://forum.alta.inc/t/ap-release-notes/318 "2023-06-15T09:21:59Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [June 15, 2023, 9:22am UTC](https://forum.alta.inc/t/ap-release-notes/318/1 "2023-06-15T09:22:00Z")

</div>

_Thanks for all of your feedback helping improve the Alta products!_

## 3.0t

_Released on 11/03/2026_

- Mitigate CVE-2026-98432

## 3.0r

_Released on 10/29/2026_

- Restore performance to pre-3.0p levels (including 2.4o levels for AP6\*)

## 3.0q

_Released on 10/26/2026_

- Includes the fixes from 3.0p
- AP6: Resolve intermittent stability issues introduced in 3.0p
- Improve mesh stability

## 3.0p

_Released on 10/23/2026_

- Remove eMudhra and Sectigo/Comodo AAA root certificates
- Address several Linux potential skb vulnerabilites, including ZDI-CAN-33367
- Improve reliability on networks with hundreds of VLANs
- Improve client compatibility when using guest backup network
- Captive portal: Allow user to optionally view typed password/voucher
- Revert to original config after fallback-upon-failure is no longer necessary
- Resolve issue with manual setting of 80 MHz channels

## 2.4o and 3.0o

_Released on 10/08/2026_

- Add support for forcing devices to connect to specific APs and bands
- Various scalability improvements
- Resolve some intermittent issues with Hotspots

## 2.4n and 3.0n

_Released on 09/24/2026_

- Improve stability on large sites, as well as when there are many VLANs

## 2.4m and 3.0m

_Released on 09/10/2026_

- Add support for captive portal email collection, throttling speed until email is verified
- Improve connection reliability during AP scans
- Improve system stability

## 3.0l

_Released on 08/27/2026_

- Improve latency during AP scans

## 2.4l

_Released on 08/24/2026_

- Resolve issues with upgrading from 2.4k

## 3.0k and 2.4k

_Released on 08/20/2026_

- Improve mesh loop detection
- Add support for searching for APs by BSSID in controller (including globally)
- Add support for disabling individual passwords
- Add support for OWE (Set WPA3 to On in Open SSID)
- Improve system stability

## **3.0j (AP7-Pro Only)**

_Released on 08/18/2026_

- Add support for MLO (Multi-Link Operation)

## 3.0i (AP7-Pro) and 2.4j (All AP6)

_Released on 08/06/2026_

- Improve WPA3 transition mode compatibility with older devices
- Add NAS-IP-Address to all RADIUS frames
- AP6W: Resolve reporting of incorrect mesh status
- Improve mesh loop detection
- Resolve issues with incorrect 802.1x identity reporting
- AP7-Pro: Improve system stability

## 3.0h (AP7-Pro) and 2.4i (All AP6)

_Released on 07/16/2026_

- Add support for per-client profiles
- Add support for manual mesh uplink selection
- Save historical temperature statistics

## 3.0g (AP7-Pro Only)

_Released on 07/08/2026_

- Resolve issues with full scans (and at times quick scans) failing.
- Increase maximum client count to 500+.
- Improve DDNS certificate registration reliability.
- Improve controller connection reliability.
- Update regulatory database for India.

## 3.0f (AP7-Pro Only)

_Released on 06/26/2026_

- Add DFS channels for 5GHz radio

## 2.4h

_Released on 06/11/2026_

- Add support for schedule profiles. Assign a schedule to a specific password, voucher, or client, instead of being SSID-wide.
- Add support for schedules on filters. Turns on/off the filter based on a schedule.

## 2.4g

_Released on 05/12/2026_

- Resolve issues with open and EAP SSIDs not starting, which was introduced with 2.4f.

## 2.4f

_Released on 05/11/2026_

- Resolve issues with WiFi filters on open/EAP networks.
- Apply Linux dirty-frag security patch, out of additional caution.

## 2.4e

_Released on 04/30/2026_

- AP6W: Resolve issues with TX Power reporting

## 2.4d

_Released on 04/23/2026_

- Add support for multiple filter profiles per WiFi password, voucher, profile, and client.
- Improve IPv6 support on non-Standard network types.
- Resolve auto-channel selection issues on coordinating AP.

## 2.4c

_Released on 04/07/2026_

- Resolve issues with RS/DHCPv6 packets on non-Standard Network Types.
- Resolve issues with filter blocking hosts that resolve to 0.0.0.0.
- Resolve issues with auto-channel selection on coordinating AP.

## 2.4b

_Released on 02/19/2026_

- Update dnsmasq to 2.90.
- Improve connection reliability to controller.
- Improve compatibility with local controllers on IPv6.
- Eliminate redundant IPv6 neighbor solicitations related to hardware acceleration.

## 2.4a

_Released on 02/02/2026_

- Add support for reporting firmware updates to audit log.
- Add support for reporting storage usage.
- Add support for reporting Ethernet link speed.
- Reduce DNS traffic used for connectivity checks.
- Resolve DNS resolution issues introduced in 2.2z.

## 2.2z

_Released on 01/29/2026_

- Add support for reporting firmware updates to audit log.
- Add support for reporting storage usage.
- Add support for reporting Ethernet link speed.
- Reduce DNS traffic used for connectivity checks.

## 2.2y

_Released on 01/14/2026_

- Resolve issue with medium to long AP names getting transmitted in beacons.

## 2.2x

_Released on 01/08/2026_

- Add support for transmitting AP name in beacon, for improved troubleshooting with 3rd party tools (Settings-\>System-\>Advanced).
- Add IP address to RADIUS accounting packets.
- Improve mesh connection reliability,
- Add wired driver to wpa\_supplicant (CLI support only).

## 2.2w

_Released on 12/11/2025_

- Improve stability in statistics task.

## 2.2v

_Released on 12/11/2025_

- Add support for displaying password/voucher used in Devices List.
- Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed.

## 2.2u

_Released on 11/25/2025_

- Resolve issues with passwordless captive portal requiring password.

## 2.2t

_Released on 11/17/2025_

- Add support for WiFi Vouchers.
- Add support for WiFi Connection Profiles.
- Add support for setting RADIUS identity and upload/download speed using /wifi/auth API.
- Honor disabling of power-user settings.
- Resolve issues with RADIUS accounting on open networks.
- Improve system stability.

## 2.2s

_Released on 10/24/2025_

- Resolve issues with initial configuration, introduced in 2.2r.

## 2.2r

_Released on 10/22/2025_

- Improve LLDP reliability, especially in networks with many VLANs.
- Improve CPU responsiveness on larger sites.
- Improve auto-channel reliability.

## 2.2q

_Released on 09/17/2025_

- Resolve configuration issues with extremely large configurations.
- Improve Let’s Encrypt certificate renewal reliability.
- Add support for RoamingIQ PSK Offload (for multi-dwelling deployments).

## 2.2p

_Released on 08/25/2025_

- Add support for RADIUS-based ACL.
- Resolve issues with DOH server configuration introduced in 2.2o.

## 2.2o

_Released on 08/21/2025_

- AP6W: Add support for IGMP snooping.
- Improve radsec communication reliability.

## 2.2n

_Released on 08/07/2025_

- Add support for persistent logging.
- Add support for real-time logs in management platform.
- AP6W: Add support for manual speed selection.
- AP6W: Add support for allowed MAC per port.
- AP6W: Add support for 802.1X on ports 2 and 3.
- AP6W: Add support for MSTP/RSTP/STP.
- AP6W: Add support for per-port rate limiting.

## 2.2m

_Released on 07/03/2025_

- AP6W: Add support for 802.1X authentication on port 1. Port 2 will be available for 802.1X in a future release.
- AP6W: Add support for voice VLAN via LLDP-MED.
- RADIUS: Add extended Connect Info for Improved Carrier Offload Stats.
- Improve stability with PSKs with many options enabled.
- Improve mesh uplink selection.
- Resolve VLAN1 leakage (for 30ms after association) from Open SSID set to non-VLAN1.

## 2.2l

_Released on 06/09/2025_

- AP6W: Add support for LLDP.
- Improve system reliability, particularly in multi-VLAN networks.
- Improve AP responsiveness during broadcast storm.

## 2.2k

_Released on 05/08/2025_

- Add support for Password-based Device Limits (i.e. max 1 device per password, etc.).
- AP6W: Add support for port-based VLANs.
- AP6W: Add support for port traffic statistics, link speed, and connected MAC addresses.
- AP6W: Enable support for PoE Passthrough.
- Improve NTP sync in networks where non-zero DSCP frames are dropped.
- Improve reliability of bringing up all configured BSSIDs.
- Add support for 16 SSIDs per radio.

## 2.2i

_Released on 04/08/2025_

- Honor static IP address setting even if system switches to DHCP (via manual config, or fallback).
- Use HTTP for time synchronization, in case NTP is unavailable.
- Improve system stability.

## 2.2h

_Released on 03/26/2025_

- Add support for optional PMF setting.
- Report LLDP uplink to back-end, to identify last known connected port.
- Improve overall system stability.
- Improve fast roaming reliability.
- Improve auto-channel planning reliability.
- Improve mesh uplink selection.
- Improve reliability of RADIUS accounting stats transmission.

## 2.2g

_Released on 02/21/2025_

- Add support for alternative RADIUS TLS configuration.
- Improve mDNS proxy for non-standard network types.
- Improve uplink detection.

## 2.2f

_Released on 01/17/2025_

- Report RADIUS Identity.
- Allow AP Name to be used for NAS ID.

## 2.2e

_Released on 12/17/2024_

- Resolve unnecessary full reconfiguration when minor changes are made, when management VLAN is non-default.
- Auto-channel: Raise channel utilization required to disable 2GHz radios.

## 2.2d

_Released on 11/13/2024_

- Add support for auto-channel manual replanning.
- Report channel bandwidth to controller.
- Improve auto-channel planning stability.
- AP6-Pro-Outdoor: Resolve 5 GHz channel issues in the UK.

## 2.2c

_Released on 10/30/2024_

- Auto-channel: Add support for mixed auto-channel / manual-bandwidth and manual-channel / auto-bandwidth.
- Improve auto-channel stability.
- Add support for setting custom NAS Identifier.

## 2.2b

_Released on 10/16/2024_

- Improve auto-channel planner stability.

## 2.2a

_Released on 10/15/2024_

- Adjust auto-channel adjustment period to daily.
- Improve Wireless stability, especially with auto-channel enabled.

## 2.0z

_Released on 10/05/2024_

- Add site-wide auto-channel coordination.
- Improve stability.

_Special Notes about auto-channel coordination:_

- _To use this feature, set the channel to auto and the bandwidth to 80 MHz for 5 GHz._
- _Coordination now runs on power-up and every 24 hours to ensure optimal performance. When configured as above, the channel and bandwidth will be coordinated across the site._
- _TX power remains unchanged during automatic adjustments._
- _If one AP has a manually set channel and the others are set to auto, the utility will coordinate the auto-configured APs to work around the manually configured device, preserving the preferred configuration without introducing new issues._
- _To allow DFS channels for auto channel use, navigate to **Settings \> System \> Advanced** and toggle on **5 GHz Auto Channel DFS**. We’ll start to auto-enable this setting for new sites in a future release of Control._
- _To restrict specific channels from auto-selection, use the **5 GHz Auto Channel Restriction** setting (also in **Settings \> System \> Advanced** )._
- _Currently, auto bandwidth affects any AP configured with an auto channel. We plan to update the logic so that it applies only to APs set to 80MHz, ensuring APs configured with narrower channel widths are respected, until the full auto bandwidth feature is implemented._

## 2.0y

_Released on 09/16/2024_

- Improve Fast Roaming Support
- Improve WiFi performance
- Improve Captive Portal when using local controller

## 2.0x

_Released on 08/13/2024_

- Add SSID to hotspot token

## 2.0w

_Released on 07/19/2024_

- Add support for controllers behind reverse proxy
- Resolve mesh issues if country does not allow UNII-1 (outdoors or indoors)

## 2.0v

_Released on 07/12/2024_

- Update DPI Engine, adding support for Adult Content filter
- Add support for hotspot on APs connected to local controllers
- Add support for radsec cacert option (in addition to cacerts)
- Improve discovery of devices to local controllers

## 2.0u

_Released on 06/26/2024_

- Enable DFS channels in US for AP6-Pro-Outdoor

## 2.0s:

_Released on 06/24/2024_

- Improve fast roaming reliability
- Resolve management ability in networks where NTP traffic is blocked.
- Resolve issue in sending stats from APs with heavy usage
- Remove extraneous newline at end of hotspot token AP ID

## 2.0q:

_Released on 05/15/2024_

- Add support for SNMP
- Fix RADIUS-assigned VLANs if default VLAN is not 1

## 2.0p

_Released on 05/08/2024_

- Improve fast roaming reliability.
- Improve reliability with local controllers.
- Add AP MAC to captive portal encrypted token.

## 2.0o

_Released on 04/25/2024_

- Resolve issues with WiFi clients being disconnected after any portal setting change.
- Improve cloud connection reliability.

## 2.0n

_Released on 04/17/2024_

- Resolve issues with WiFi clients being disconnected after any portal setting change.

## 2.0m

_Released on 04/15/2024_

- Improve mesh reliability when STP/RSTP/MSTP is enabled on the wired network.
- Add hostapd option “nas\_identifier\_id=1” to use device ID as NAS ID.

## 2.0k

_Released on 04/05/2024_

- Improve device discoverability after being connected for extended periods of time.
- **Special thanks to @anon77415413 for the help testing this one!**

## 2.0j

_Released on 03/22/2024_

- Add support for setting low-level SSID settings, such as uapsd, via power-user settings
- Resolve captive portal issues if unit is factory reset without a reboot
- Resolve intermittent issue of TX/RX rate reporting None/None
- Improve radsecproxy security

## 2.0i

_Released on 02/22/2024_

- Further resolve discovery issues when using multiple VLANs on an SSID  
Would be nice to give a shout out to @regchan for reporting the issue so quickly

## 2.0h

_Released on 02/22/2024_

- Resolve discovery issues when using multiple VLANs on an SSID
- Improve system stability

## 2.0g

_Released on 02/02/2024_

- Add support for connecting to local controller
- Add support for HotSpot 2.0 and RadSec
- Fix discovery for devices that are manually configured for VLAN1
- Fix 5 GHz radio not starting if bandwidth is set incorrectly

_NOTE: 2.0f was skipped as it was an internal-only release_

## 2.0e

_Released on 01/06/2024_

- Resolve issues with DPI filter list overflowing

## 2.0d

_Released on 01/03/2024_

- Improve system stability

## 2.0c

_Released on 12/28/2023_

- Improve wireless connectivity

## 2.0b

_Released on 12/21/2023_

- Resolve intermittent disconnect/reconnect issues

## 2.0a

_Released on 12/20/2023_

- Resolve issues with running captive portals on non-native VLAN SSIDs/PSKs
- Resolve discovery issues if there are multiple VLANs on an SSID
- Add support for non-gateway DNS servers for IOT/Guest/Internet-only Network Types
- Improve stability

## 1.1p

- Fix download/upload rate for open networks
- Fix up radio config for incorrect channel configurations

## 1.1o

- Fix connectivity issue when network access is requested

## 1.1n

- Improve roaming stability
- Improve hotspot stability
- Fix issue when schedule block ends at midnight

## 1.1m

- Improve roaming stability
- Network types: Add support for networks with separate DHCP server and router

## 1.1k

- Improve LLDP uplink port reporting
- Add support for manual TX power setting
- Fix WiFi client misconfiguration when roaming
- Fix poor performance for downlink mesh AP when AP roams
- Improve stability

## 1.1j

- Improve mesh uplink stability
- Improve overall stability
- Enable “Always On” by default. This change will apply to new and existing sites where the setting has never been adjusted.
- Improve LLDP frame reception

## 1.1i

- Update to latest Wireless driver with performance and stability improvements
- Add support for remote syslog host
- Add support for disabling DPI engine, for debugging purposes
- Add support for disabling 11v, for debugging purposes
- Use configured name as system hostname
- Fix issue where app tracking stopped due to the Bypass Filter option
- Improve Wireless stability

## 1.1h

- General stability improvements

## 1.1g

- Fix intermittent TX power reporting issues.
- Fix intermittent issue where bandwidth modification caused beaconing on that band to stop.

## 1.1f

- Resolved inconsistent mesh uplink reporting.
- Resolved missing stats from certain SSIDs.

## 1.1e

- Improve stability for devices that are not connected to an LLDP peer.

## 1.1d

- Improve VLAN bridging between disparate VLANs, especially with non-native management VLAN configuration, and especially with IPv6 traffic.
- Improve UNII-3 (~5.7 to ~5.8 GHz) short-range band support for ETSI regions.

## 1.1c

- Add ability to disable mesh per-access-point.
- Display AP mesh link information.
- Add ability to reboot devices (Open Network - Device Window / Settings tab, hold the shift key, then click Reboot).
- Add ability to disable automatic upgrade on a site basis.
- Stability improvements.

## 1.1b

- Resolve wireless instability, especially if IPv6 is unavailable and Always On is enabled

## 1.1a

- Improved stability, particularly in IPv6 environments.
- Improved Mesh reliability, especially with Always On enabled.

## 1.0z

- 
  - Resolved issue with bridging IPv6 traffic to non-native VLANs  
Please check to ensure you’re running on the latest version on the Network tab. Click the arrow to upgrade.  
 ![image](https://forum.alta.inc/uploads/default/original/1X/c6c74b2173c72300c0b1379a098ce8b059aad981.png)

## 1.0y

- Several stability improvements
- Added LLDP support (TX and RX

 ![image](https://forum.alta.inc/uploads/default/original/1X/b53136637f504eeb68d3b99cf9224a8713b4ac1a.png)

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [November 17, 2025, 11:51pm UTC](https://forum.alta.inc/t/ap-release-notes/318/15 "2025-11-17T23:51:25Z")

</div>

# [AP Firmware 2.2t Released!](https://forum.alta.inc/t/ap-firmware-2-2t-released/6249)

This update brings new WiFi feature capabilities, improves AP provisioning, and resolves several issues to ensure more reliable and consistent network performance.

- Add support for WiFi Vouchers.
- Add support for WiFi Connection Profiles.
- Add support for setting RADIUS identity and upload/download speed using /wifi/auth API.
- Honor disabling of power-user settings.
- Resolve issues with RADIUS accounting on open networks.
- Improve system stability.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22t-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2w Released on 12/11/2025 Improve stability in statistics task. 2.2v Released on 12/11/2025 Add support for displaying password/voucher used in Devices List. Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed. 2.2u Released on 11/25/2025 Resolve issues with passwordless captive portal requiring password. 2.2t Released on 11/17/2025 Add support for WiFi Vouchers. Add su…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2t-released/6249).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [November 25, 2025, 10:30pm UTC](https://forum.alta.inc/t/ap-release-notes/318/16 "2025-11-25T22:30:18Z")

</div>

# [AP Firmware 2.2u Released!](https://forum.alta.inc/t/ap-firmware-2-2u-released/6284)

This update provides a correction to captive portal behavior to ensure expected operation.

- Resolve issues with passwordless captive portal requiring password.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22u-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2w Released on 12/11/2025 Improve stability in statistics task. 2.2v Released on 12/11/2025 Add support for displaying password/voucher used in Devices List. Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed. 2.2u Released on 11/25/2025 Resolve issues with passwordless captive portal requiring password. 2.2t Released on 11/17/2025 Add support for WiFi Vouchers. Add su…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2u-released/6284).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [December 11, 2025, 10:58pm UTC](https://forum.alta.inc/t/ap-release-notes/318/17 "2025-12-11T22:58:51Z")

</div>

# [AP Firmware 2.2v Released!](https://forum.alta.inc/t/ap-firmware-2-2v-released/6316)

This update includes refinements that enhance hotspot operation and provide improved insight into client activity.

- Add support for displaying password/voucher used in Devices List.
- Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22v-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2w Released on 12/11/2025 Improve stability in statistics task. 2.2v Released on 12/11/2025 Add support for displaying password/voucher used in Devices List. Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed. 2.2u Released on 11/25/2025 Resolve issues with passwordless captive portal requiring password. 2.2t Released on 11/17/2025 Add support for WiFi Vouchers. Add su…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2v-released/6316).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [December 12, 2025, 2:11am UTC](https://forum.alta.inc/t/ap-release-notes/318/18 "2025-12-12T02:11:56Z")

</div>

# [AP Firmware 2.2w Released!](https://forum.alta.inc/t/ap-firmware-2-2w-released/6319)

This hotfix provides a targeted correction for the 2.2v release.

- Improve stability in statistics task.

We’ve also included the changes from the 2.2v release below so everything is in one place.

- Add support for displaying password/voucher used in Devices List.
- Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22w-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2w Released on 12/11/2025 Improve stability in statistics task. 2.2v Released on 12/11/2025 Add support for displaying password/voucher used in Devices List. Resolve issue when incorrect hotspot certificate is used when Let’s Encrypt certificate is renewed. 2.2u Released on 11/25/2025 Resolve issues with passwordless captive portal requiring password. 2.2t Released on 11/17/2025 Add support for WiFi Vouchers. Add su…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2w-released/6319).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [January 9, 2026, 2:53am UTC](https://forum.alta.inc/t/ap-release-notes/318/19 "2026-01-09T02:53:38Z")

</div>

# [AP Firmware 2.2x Released!](https://forum.alta.inc/t/ap-firmware-2-2x-released/6377)

This update delivers targeted enhancements to system visibility, authentication, and connectivity, strengthening observability, security, and reliability across the platform.

- Add support for transmitting AP name in beacon, for improved troubleshooting with 3rd party tools (Settings-\>System-\>Advanced).
- Add IP address to RADIUS accounting packets.
- Improve mesh connection reliability,
- Add wired driver to wpa\_supplicant (CLI support only).

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22x-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2x Released on 01/08/2026 Add support for transmitting AP name in beacon, for improved troubleshooting with 3rd party tools (Settings-\>System-\>Advanced). Add IP address to RADIUS accounting packets. Improve mesh connection reliability, Add wired driver to wpa\_supplicant (CLI support only). 2.2w Released on 12/11/2025 Improve stability in statistics task. 2.2v Released on 12/11/2025 Add support for displaying password/v…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2x-released/6377).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [January 14, 2026, 6:15pm UTC](https://forum.alta.inc/t/ap-release-notes/318/20 "2026-01-14T18:15:54Z")

</div>

# [AP Firmware 2.2y Released!](https://forum.alta.inc/t/ap-firmware-2-2y-released/6401)

This hotfix includes targeted fixes related to beacon behavior in the 2.2x release.

- Resolve issue with medium to long AP names getting transmitted in beacons.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22y-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2y Released on 01/14/2026 Resolve issue with medium to long AP names getting transmitted in beacons. 2.2x Released on 01/08/2026 Add support for transmitting AP name in beacon, for improved troubleshooting with 3rd party tools (Settings-\>System-\>Advanced). Add IP address to RADIUS accounting packets. Improve mesh connection reliability, Add wired driver to wpa\_supplicant (CLI support only). 2.2w Released on 12/11/2025 I…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2y-released/6401).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [January 29, 2026, 11:06pm UTC](https://forum.alta.inc/t/ap-release-notes/318/21 "2026-01-29T23:06:50Z")

</div>

# [AP Firmware 2.2z Released and Pulled](https://forum.alta.inc/t/ap-firmware-2-2z-released/6432)

This release enhances reporting and system visibility while improving operational efficiency.

- Add support for reporting firmware updates to audit log.
- Add support for reporting storage usage.
- Add support for reporting Ethernet link speed.
- Reduce DNS traffic used for connectivity checks.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-22z-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.2z Released on 01/29/2026 Add support for reporting firmware updates to audit log. Add support for reporting storage usage. Add support for reporting Ethernet link speed. Reduce DNS traffic used for connectivity checks. 2.2y Released on 01/14/2026 Resolve issue with medium to long AP names getting transmitted in beacons. 2.2x Released on 01/08/2026 Add support for transmitting AP name in beacon, for improved troublesho…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-2z-released/6432).

**NOTE: This release has been pulled temporarily, as we are seeing higher than usual disconnections after upgrade.**

If you have an AP on 2.2z that is disconnected, please power cycle the AP and wait 2 minutes until it becomes connected, then click the upgrade button to go back to 2.2y. This should typically only take 1 power cycle.

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [February 2, 2026, 11:09pm UTC](https://forum.alta.inc/t/ap-release-notes/318/22 "2026-02-02T23:09:12Z")

</div>

# [AP Firmware 2.4a Released](https://forum.alta.inc/t/ap-firmware-2-4a-released/6450)

This release expands system visibility and reporting while optimizing network efficiency and operational reliability.

- Add support for reporting firmware updates to audit log.
- Add support for reporting storage usage.
- Add support for reporting Ethernet link speed.
- Reduce DNS traffic used for connectivity checks.
- Resolve DNS resolution issues introduced in 2.2z.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24a-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4a Released on 02/02/2026 Add support for reporting firmware updates to audit log. Add support for reporting storage usage. Add support for reporting Ethernet link speed. Reduce DNS traffic used for connectivity checks. Resolve DNS resolution issues introduced in 2.2z. 2.2z Released on 01/29/2026 Add support for reporting firmware updates to audit log. Add support for reporting storage usage. Add support for reporting Eth…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4a-released/6450).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [February 20, 2026, 12:41am UTC](https://forum.alta.inc/t/ap-release-notes/318/23 "2026-02-20T00:41:45Z")

</div>

# [AP Firmware 2.4b Released](https://forum.alta.inc/t/ap-firmware-2-4b-released/6492)

This firmware release expands system visibility and reporting while improving controller reliability and IPv6 behavior. It includes updates to core networking services and refinements to IPv6 handling to support more consistent AP operation.

- Update dnsmasq to 2.90.
- Improve connection reliability to controller.
- Improve compatibility with local controllers on IPv6.
- Eliminate redundant IPv6 neighbor solicitations related to hardware acceleration.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24b-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4b Released on 02/19/2026 Update dnsmasq to 2.90. Improve connection reliability to controller. Improve compatibility with local controllers on IPv6. Eliminate redundant IPv6 neighbor solicitations related to hardware acceleration. 2.4a Released on 02/02/2026 Add support for reporting firmware updates to audit log. Add support for reporting storage usage. Add support for reporting Ethernet link speed. Reduce DNS traffic u…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4b-released/6492).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [April 7, 2026, 7:02pm UTC](https://forum.alta.inc/t/ap-release-notes/318/24 "2026-04-07T19:02:11Z")

</div>

# [AP Firmware 2.4c Released](https://forum.alta.inc/t/ap-firmware-2-4c-released/6617)

This firmware release delivers targeted fixes to networking behavior and AP coordination, improving reliability across non-standard network configurations and optimizing channel selection in deployments.

- Resolve issues with RS/DHCPv6 packets on non-Standard Network Types.
- Resolve issues with filter blocking hosts that resolve to 0.0.0.0.
- Resolve issues with auto-channel selection on coordinating AP.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24c-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4c Released on 04/07/2026 Resolve issues with RS/DHCPv6 packets on non-Standard Network Types. Resolve issues with filter blocking hosts that resolve to 0.0.0.0. Resolve issues with auto-channel selection on coordinating AP. 2.4b Released on 02/19/2026 Update dnsmasq to 2.90. Improve connection reliability to controller. Improve compatibility with local controllers on IPv6. Eliminate redundant IPv6 neighbor solicitations …

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4c-released/6617).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [April 23, 2026, 8:57pm UTC](https://forum.alta.inc/t/ap-release-notes/318/25 "2026-04-23T20:57:42Z")

</div>

# [AP Firmware 2.4d Released](https://forum.alta.inc/t/ap-firmware-2-4d-released/6660)

This firmware update expands policy flexibility and strengthens core networking behavior. It enables more granular control over content filtering while improving IPv6 reliability and refining automatic channel selection for more consistent wireless performance.

- Add support for multiple filter profiles per WiFi password, voucher, profile, and client.
- Improve IPv6 support on non-Standard network types.
- Resolve auto-channel selection issues on coordinating AP.

_As part of filter profile migration, all old WiFi site-wide filter settings have been converted to global (not just site-wide) filter profiles. All WiFi passwords, vouchers, connection profiles, and client filter settings have been migrated to refer to the newly migrated filter profiles, unless filtering was bypassed. The filter profile name is derived from the site id, i.e. default-12345678._

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24d-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4d Released on 04/23/2026 Add support for multiple filter profiles per WiFi password, voucher, profile, and client. Improve IPv6 support on non-Standard network types. Resolve auto-channel selection issues on coordinating AP. 2.4c Released on 04/07/2026 Resolve issues with RS/DHCPv6 packets on non-Standard Network Types. Resolve issues with filter blocking hosts that resolve to 0.0.0.0. Resolve issues with auto-channel se…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4d-released/6660).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [April 30, 2026, 8:00pm UTC](https://forum.alta.inc/t/ap-release-notes/318/26 "2026-04-30T20:00:48Z")

</div>

# [AP Firmware 2.4e Released](https://forum.alta.inc/t/ap-firmware-2-4e-released/6682)

This firmware update improves operational accuracy and reinforces consistent device behavior.

- AP6W: Resolve issues with TX Power reporting

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24e-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4e Released on 04/30/2026 AP6W: Resolve issues with TX Power reporting 2.4d Released on 04/23/2026 Add support for multiple filter profiles per WiFi password, voucher, profile, and client. Improve IPv6 support on non-Standard network types. Resolve auto-channel selection issues on coordinating AP. 2.4c Released on 04/07/2026 Resolve issues with RS/DHCPv6 packets on non-Standard Network Types. Resolve issues with filter…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4e-released/6682).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [May 11, 2026, 10:13pm UTC](https://forum.alta.inc/t/ap-release-notes/318/27 "2026-05-11T22:13:17Z")

</div>

# [AP Firmware 2.4f Released](https://forum.alta.inc/t/ap-firmware-2-4f-released/6707)

This firmware update improves filtering reliability across a wider range of network environments and includes additional security hardening at the system level.

- Resolve issues with WiFi filters on open/EAP networks.
- Apply Linux dirty-frag security patch, out of additional caution.

_NOTE: While we have been unable to exploit the dirty frag vulnerability on prior firmware releases internally, we have patched the kernel to ensure that it is not possible._

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24f-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4f Released on 05/11/2026 Resolve issues with WiFi filters on open/EAP networks. Apply Linux dirty-frag security patch, out of additional caution. 2.4e Released on 04/30/2026 AP6W: Resolve issues with TX Power reporting 2.4d Released on 04/23/2026 Add support for multiple filter profiles per WiFi password, voucher, profile, and client. Improve IPv6 support on non-Standard network types. Resolve auto-channel selection i…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4f-released/6707).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [May 12, 2026, 1:07pm UTC](https://forum.alta.inc/t/ap-release-notes/318/28 "2026-05-12T13:07:49Z")

</div>

# [AP Firmware 2.4g Released](https://forum.alta.inc/t/ap-firmware-2-4g-released/6713)

This hotfix release resolves an issue affecting SSID availability introduced in firmware version 2.4f.

- Resolve issues with open and EAP SSIDs not starting, which was introduced with 2.4f.

_NOTE: We will be updating our automated test procedures to ensure this can not happen again._

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24g-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4g Released on 05/12/2026 Resolve issues with open and EAP SSIDs not starting, which was introduced with 2.4f. 2.4f Released on 05/11/2026 Resolve issues with WiFi filters on open/EAP networks. Apply Linux dirty-frag security patch, out of additional caution. 2.4e Released on 04/30/2026 AP6W: Resolve issues with TX Power reporting 2.4d Released on 04/23/2026 Add support for multiple filter profiles per WiFi password…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4g-released/6713).

---

<div class="post-metadata">

**Author:** ![Alta-MikeD](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-miked/32/1942_2.png) [@Alta-MikeD](https://forum.alta.inc/u/Alta-MikeD)\
**Post date:** [June 11, 2026, 11:15pm UTC](https://forum.alta.inc/t/ap-release-notes/318/29 "2026-06-11T23:15:23Z")

</div>

# **[AP Firmware 2.4h Released](https://forum.alta.inc/t/ap-firmware-2-4h-released/6773)**

This release expands scheduling capabilities across the platform, providing more flexible control over network access policies and allowing schedules to be applied at a more granular level.

- Add support for schedule profiles. Assign a schedule to a specific password, voucher, or client, instead of being SSID-wide
- Add support for schedules on filters. Turns on/off the filter based on a schedule

_WiFi Schedules move from being exclusively per-SSID, to a global list of schedules which can be assigned to individual passwords, vouchers, SSIDs, and clients_

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-24h-1):
>
> Thanks for all of your feedback helping improve the Alta products! 2.4h Released on 06/11/2026 Add support for schedule profiles. Assign a schedule to a specific password, voucher, or client, instead of being SSID-wide. Add support for schedules on filters. Turns on/off the filter based on a schedule. 2.4g Released on 05/12/2026 Resolve issues with open and EAP SSIDs not starting, which was introduced with 2.4f. 2.4f Released on 05/11/2026 Resolve issues with WiFi filters on open/EAP ne…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap-firmware-2-4h-released/6773).

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [June 26, 2026, 11:05pm UTC](https://forum.alta.inc/t/ap-release-notes/318/30 "2026-06-26T23:05:31Z")

</div>

# **[AP7-Pro Firmware 3.0f Released](https://forum.alta.inc/t/ap7-pro-firmware-3-0f-released/6808)**

This release enables DFS channels for the 5GHz radio on the AP7-Pro

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-30f-ap7-pro-only-1):
>
> Thanks for all of your feedback helping improve the Alta products! 3.0f (AP7-Pro Only) Released on 06/26/2026 Add DFS channels for 5GHz radio 2.4h Released on 06/11/2026 Add support for schedule profiles. Assign a schedule to a specific password, voucher, or client, instead of being SSID-wide. Add support for schedules on filters. Turns on/off the filter based on a schedule. 2.4g Released on 05/12/2026 Resolve issues with open and EAP SSIDs not starting, which was introduced with 2.4f. …

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap7-pro-firmware-3-0f-released/6808).

---

<div class="post-metadata">

**Author:** ![Alta-Matt\_v2](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-matt_v2/32/2456_2.png) [@Alta-Matt\_v2](https://forum.alta.inc/u/Alta-Matt_v2)\
**Post date:** [July 8, 2026, 10:29pm UTC](https://forum.alta.inc/t/ap-release-notes/318/31 "2026-07-08T22:29:10Z")

</div>

# **[AP7-Pro Firmware 3.0g Released](https://forum.alta.inc/t/ap7-pro-firmware-3-0g-released/6845)**

• Resolve issues with full scans (and at times quick scans) failing.  
• Increase maximum client count to 500+.  
• Improve DDNS certificate registration reliability.  
• Improve controller connection reliability.  
• Update regulatory database for India.

**This update is being rolled out now.** You can manually initiate the upgrade if you’d like, or it will automatically update overnight (if auto-updates are enabled). The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-30g-ap7-pro-only-1):
>
> Thanks for all of your feedback helping improve the Alta products! 3.0g (AP7-Pro Only) Released on 07/08/2026 Resolve issues with full scans (and at times quick scans) failing. Increase maximum client count to 500+. Improve DDNS certificate registration reliability. Improve controller connection reliability. Update regulatory database for India. 3.0f (AP7-Pro Only) Released on 06/26/2026 Add DFS channels for 5GHz radio 2.4h Released on 06/11/2026 Add support for schedule profiles. Assig…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap7-pro-firmware-3-0g-released/6845).

---

<div class="post-metadata">

**Author:** ![Alta-Jeff](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-jeff/32/56_2.png) [@Alta-Jeff](https://forum.alta.inc/u/Alta-Jeff)\
**Post date:** [July 16, 2026, 9:36pm UTC](https://forum.alta.inc/t/ap-release-notes/318/32 "2026-07-16T21:36:51Z")

</div>

# [**AP7-Pro 3.0g and AP6 2.4i Released**](https://forum.alta.inc/t/ap7-pro-3-0h-and-ap6-2-4i-firmware-released/6860)

- Add support for per-client profiles
- Add support for manual mesh uplink selection
- Save historical temperature statistics
- Add support for Custom Update Windows

**This update is being rolled out now.** You can manually initiate the upgrade, or it will update overnight when auto-updates are enabled. The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-30h-ap7-pro-and-24i-all-ap6-1):
>
> Thanks for all of your feedback helping improve the Alta products! 3.0h (AP7-Pro) and 2.4i (All AP6) Released on 07/16/2026 Add support for per-client profiles Add support for manual mesh uplink selection Save historical temperature statistics 3.0g (AP7-Pro Only) Released on 07/08/2026 Resolve issues with full scans (and at times quick scans) failing. Increase maximum client count to 500+. Improve DDNS certificate registration reliability. Improve controller connection reliability. Update …

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap7-pro-3-0h-and-ap6-2-4i-firmware-released/6860).

---

<div class="post-metadata">

**Author:** ![Alta-Jeff](https://forum.alta.inc/user_avatar/forum.alta.inc/alta-jeff/32/56_2.png) [@Alta-Jeff](https://forum.alta.inc/u/Alta-Jeff)\
**Post date:** [August 7, 2026, 12:21am UTC](https://forum.alta.inc/t/ap-release-notes/318/33 "2026-08-07T00:21:57Z")

</div>

# [**AP7-Pro 3.0i and AP6 2.4j Released**](https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915)

- Improve WPA3 transition mode compatibility with older devices
- Add NAS-IP-Address to all RADIUS frames
- AP6W: Resolve reporting of incorrect mesh status
- Improve mesh loop detection
- Resolve issues with incorrect 802.1x identity reporting
- AP7-Pro: Improve system stability

**This update is being rolled out now.** You can manually initiate the upgrade, or it will update overnight when auto-updates are enabled. The complete, up-to-date change log is available here:

> [@AP - Release Notes](https://forum.alta.inc/t/ap-release-notes/318#p-717-h-30i-ap7-pro-and-24j-all-ap6-1):
>
> Thanks for all of your feedback helping improve the Alta products! 3.0i (AP7-Pro) and 2.4j (All AP6) Released on 08/06/2026 Improve WPA3 transition mode compatibility with older devices Add NAS-IP-Address to all RADIUS frames AP6W: Resolve reporting of incorrect mesh status Improve mesh loop detection Resolve issues with incorrect 802.1x identity reporting AP7-Pro: Improve system stability 3.0h (AP7-Pro) and 2.4i (All AP6) Released on 07/16/2026 Add support for per-client profiles Add supp…

Join the discussion and share feedback [HERE](https://forum.alta.inc/t/ap7-pro-3-0i-and-ap6-2-4j-firmware-released/6915).

[Next page](https://forum.alta.inc/t/ap-release-notes/318.md?page=2)